Suppose you’re at home, your kitchen, or in a party and your phone slips into the toilet, sink, or pool. Do not worry.
The thought of using your hard earned money to purchase another phone hits you like a brick.
It is quite true that your phone may be damaged, but if you take quick action, you can actually prevent your phone from getting damaged and save your self the extra money. Before going to what you have to do, we should take a look at what you shouldn’t do immediately after your phone falls into the water.
- You shouldn’t press any keys
- You shouldn’t turn the device on
- You should not bang, or tap the phone
- Also, do not to blow it
You should not dismantle the phone since most devices do come with a
Liquid Damage Indicator which when activated could destroy your warranty, and this could be triggered by opening your device.
Only open it if you feel it is completely necessary.
Do not heat it (this includes microwaving it or using a blow dryer).
The heat that comes out from a dryer can damage your device’s internal components for life.
You shouldn’t blow air on your phone. This may send water into vital parts of your device that it had not reached yet thus causing more damage to the device.
Do not cool it down
Here are the steps you should take after your phones fall into water
Table of Contents
1. Remove the phone’s battery
This is among the most critical steps to saving your phone. Many of the device circuits will survive a water damage provided they’re not connected to a power source when wet.
To check whether your phone is damaged by water, take a look at the corner where the battery is. You should see a white circle or square, with or without red lines. If you see, a red or pink color, then your phone is damaged by water.
2. Quickly remove the SIM chip
Some of your important contacts and different files/information could be in your SIM. For a few people, saving the SIM chip could be worth saving than the device itself. A SIM chip has a tendency to survive water damage, however, it is also advisable you get it out immediately and dry it.
3. You should remove the SD Card, earphones, and other accessories
Remove all accessories and plugs that cover the slots of the device, and gaps to expose them to drying.
4. Keep your handset with the screen pointing up.
One vital thing you need to do amongst the other things is to avoid water from getting close to your screen’s electronics. To keep the danger of damaging your phone’s screen, keep it pointing upwards and gravity will do its thing to keep more moisture from getting close to the screen.
5. Dry your device with a soft paper towel.
Dry your smartphone with paper towels to remove moisture from the device. You can likewise wrap your handset in paper towels, and shake it up to get more moisture out of your handset’s core…
6. Get a drying agent
To dry your handset completely and fast, you’ll have to absorb all moisture from its core. The following are two effective drying agents that you can use to dry your handset:
1. Silica Gel Pacs
2. Rice
You should get enough of these two to cover your handset completely from all sides. If you don’t have access to these two, you can consider using a vacuum cleaner. It can also save your mobile device from becoming water damaged.
7. Now, wait for 48 hours
If you truly want to recover your phone from water damage you will need to be patient. Do not even try to turn on the device to avoid short circuits.
The above steps given will help recover your smartphone from getting damaged by water and other liquids.
Meanwhile, you must take a preventive measure by buying Rice or, Silica Gel Packs to ensure you are completely prepared for such situations if one should occur.
